Searched for "fluids".

Ability of a filter to retain specific test contamination in a hydraulic fluid with a specified contamination concentration under defined test conditions (CETOP RP 100). As the test method for filtration

digital signal processing is increasingly dominant, because the majority of measuring procedures in fluid technology are analogue, it is necessary to use an A/D converter .

As with electrics, a distinction is made in fluid technology between series and parallel resistances. For series circuits - as is the case for pipelines - the individual resistances are added ( series

Velocity of the transmission of pressure in a fluid (speed of sound). It is dependent on the bulk modulus K of the medium and its density ρ: In air in the normal state it is 333 m/s. In mineral oil it

secondary flow (f), as the separate circuit is selected in which a separate filter pump presses the fluid through the filter and mostly also through an oil cooler, independently of the working cycle. See

flapper are firmly connected together and are supported by a thin-walled flexible tube. Hydraulic fluid flows continuously from Ps through the two fixed throttles to the nozzles; through the nozzles to

power lost by a hydraulic system is converted into heat, which is largely absorbed by the pressure fluid . It is comprised of the pressure losses caused by pipe friction and flow deflections, leakage losses

its easy access. The disadvantage is how the pressure and delivery flow pulsation in the pressure fluid cause higher noise emissions at the wall, not to mention the large amount of space taken up, the extensive

Rotary joint for the flow of hydraulic fluid between a stationary and rotating part of the machine. Multiway rotary transfer joints : Rotary transfer joints for supplying one or more loads with pressurised

The details relating to the nominal size of devices used in fluid technology are key variables which do not refer to units or dimensions and do not have to be associated with any numerical variable for