Searched for "pumps".

available for usage in potentially explosive atmospheres. By means of additional functions in the pump line, in the intermediate plates (longitudinal and sandwich valve combination) and ancillary blocks

versions are available for use at low pressure settings or with low pressure dependence, e.g. when pump (inlet) pressure is highly variable.

exceeded, the switch unit type CR switches the low-pressure circuit to circulation. The high-pressure pump carries out the pressing action. The switch unit hydraulic release acts automatically. It initiates

holding and lowering are facilitated only be means of switching on, switching off and switching on with pump delivery reversal through a suitable electric drive motor.

power pack type MPN and MPNW consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. Single-circuit or dual-circuit systems can be assembled. Type

The connection block type B is suitable for single-circuit pumps. A pressure switch can be mounted directly on the connection block. The type B variant can also be used in combination with differential

hydraulic power pack type KA consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. The compact design that this achieves is a crucial advantage

Depending on your application, a number of different motor/frequency converter combinations and pump delivery flow rates are available, as well as different variants of integrated check valve. The tank

directional spool valve type PSL and PSV in size 2 and is therefore suitable for constant and variable pump systems. It is used in mobile hydraulics, in particular in civil engineering and agricultural engineering

plate via tension rods. Pressure switches and pressure-limiting valves can be integrated into the pump lines and/or load lines. 2/2, 3/2, 4/2, 3/3 and 4/3-way seated valves with different types of actuation