CH - Hand pumps
hand pump type CH is single acting. It draws hydraulic fluid in when the hand lever is moved in one direction and discharges it when the hand lever is moved in the opposite direction.
The hand pump type
RZ - Dual-stage pump
the other. The pump elements’ output volume is merged to feed one or more pressure outlets.
The radial piston pump type RZ has a closed pump housing. Therefore, besides use as a motor pump outside an oil [...] possible. The pump is available with several pressure outlets which enable the same or several different flows. Type RZ is a classic dual-stage pump consisting of a radial piston pump and a gear pump. [...] The radial piston pump type R consists of valve-controlled pump elements arranged in star form around an eccentric. For large flow rates, up to 42 pump elements can be set up in 6 stars stacked one above
K60N, K61N - Axial piston pumps
The axial piston pump type K60N is designed for open circuits in mobile hydraulics and operates on the bent axis principle. The pump is fitted mainly to the power take-off on commercial vehicle transmissions [...] transmissions.
The axial piston pump type K61N is designed for open circuits in mobile hydraulics and operates on the bent axis principle. The pump is fitted mainly to the power take-off on commercial vehicle
C41V - Axial piston pumps
piston pump type C41V is designed for open circuits in mobile hydraulics and operates on the swash plate principle.
The large selection of different pump controllers allows the axial piston pump type C41V
AL, AN, NA - Connection blocks for dual-circuit pumps
Intermediate blocks merge the flows of the dual-circuit pump through shut-off valves, thus allowing you to mount connection blocks for single-circuit pumps according to . Valve banks with directional valves [...] The connection blocks type AN, AL and NA are suitable for dual-circuit pumps. They feature a pressure-limiting valve and one or two shut-off valves. Directional valves are integrated in some cases or can
Z - Gear type pumps
The external gear pump type Z is a constant pump with a closed pump housing. It is available as a separate hydraulic pump.
To set up a dual-stage pump type RZ (, ) the type Z described here can also be [...] be combined with a radial piston pump type R ().
FXU (FlexUnit) - Standard hydraulic power packs
tanks. The pump is located in the tank. One pump or a pump combination is possible.
Radial piston pumps or external gear pumps are both used, as well as combinations of external gear pumps with radial [...] radial piston pumps.The pumps are installed under a top housing cover in an aluminium or steel tank.
LP - Air driven hydraulic power packs
hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a standstill. The pump starts up again [...] (maintaining pressure) or the pneumatic pressure increases further.
The hydraulic pump type LP is available as a single pump, in the cover plate version or as a hydraulic power pack with different tank sizes
KADM - Pressure reducing valves
hydraulic system with a variable pump and a closed centre load sensing valve (CC-LS valve), the copier valve boosts the LS signal reported to the pump controller of the variable pump and thus compensates for oil [...] oil leakage losses in the LS line or at the pump controller. By boosting the LS signal(LS+), the KADM ensures that a sufficiently high p is provided at the CC-LS valve and there are no speed losses with [...] with the consumers.
The KADM is often used in combination with the variable pumps type V60N or C40V and the proportional directional spool valve type PSV.
HK, HKF - Compact hydraulic power packs
or triple-circuit systems can be selected. A radial piston pump, an external gear pump or an internal gear pump can be used as a hydraulic pump. The compact hydraulic power packs type HK and HKF are suitable [...] the housing. In the case of type HKF, the fan is powered by a separate motor independently of the pump motor. In the case of type HK, the fan is securely attached to the motor shaft. An external cooler