Searched for "P - R2 - 1 - 1/4 - AT".

The valve bank type BVZP consist of a connection block (with ports P and R), the directional seated valves type VZP installed on sub-plates and connected in parallel plus the end plate. The whole valve [...] using appropriate adapter plates. Various end plates (e.g. with and without pressure switch in the P gallery) extend the range of possible applications. Particularly in conjunction with hydraulic power

The directional seated valve type SP is a plug-in valve. It is a cone-seated valve. 2/2 and 3/2 directional seated valves with electromagnetic actuation are available. Depending on the application, the [...] version's plug-in valves come with AMP superseal connectors. You can combine type SP1 to a valve bank using chained valves type SL1.

valves, prevents switching surges and dampens oscillations. The restrictor check valve type FG1 and FG2 combines the function of a flow valve with a check valve. It regulates in one flow direction and

valves, prevents switching surges and dampens oscillations. The restrictor check valve type FG1 and FG2 combines the function of a flow valve with a check valve. It regulates in one flow direction and

onto the equipment rack in the hydraulic power pack. The oil tank is a round, plastic tank with an M14x1.5 filling screw. Version A 100 comes with a choice of two equipment racks (Q and H), which can be used

housing (tank). The compact hydraulic power pack is suitable for hydraulic systems with operating mode S1, S2, S3 or S6. A fan, which effectively dissipates the heat from the hydraulic system, is mounted on the

The amplifier module EV1M3 can be mounted on a 32 mm or 35 mm top-hat rail by using an additional card holder. A multi-turn potentiometer is used to configure the valve parameters such as the base and

CLHV-C can either be installed at the manifold, in the pipe, or directly at the cylinder or hydraulic motor. Type CLHV-PIB can either be installed in the pipe or directly at the cylinder or hydraulic motor

flow rate towards B across the entire pressure range. The various flow rate ranges are set at the factory at a pressure setting of 100 bar. [...] A 2-way flow control valve (dual lowering brake valve) type DSJ is used to limit flow rates in both flow directions independent of load pressure. The valve is available for various flow rate ranges according

Pressure switches open and close an electrical contact at a previously defined pressure. As soon as the pressure is reached, a further work step is started or stopped by an electrical signal.