Searched for "P - R2 - 1 - 1/4 - AT".

The compact hydraulic power pack type H consists of the tank, an integrated motor and the gear pump directly attached to the motor shaft. This compact design results in a very small installation packa

The pressure reducing valve type ADM is directly controlled. The valves have an override compensation. If for instance the secondary pressure rises above the set value due to external forces, then the

The connection blocks described here are suitable for combining with HAWE hydraulic power packs type R and RZ.

HAWE Hydraulik’s drives for exoskeletons are fully assembled hydraulic systems consisting of a hydraulic power pack, valve block, cylinder, hose line and sensor system. They were developed by HAWE Mic

The proportional amplifier type EMMA has been developed for direct mounting onto a solenoid valve as a line connector. It is suitable for controlling proportional single-action and twin solenoids. Th

Battery chargers type SBC and OBC are essential accessories for IEP batteries and components for electric drive systems. SBCs (standalone battery chargers) are external units enabling direct charging

The pressure filter type PFM contains a filter element through which the fluid flows from the inside to the outside. It can be replaced without drips or soiling using standard tools. The ratio of size

Programmable logic valve controls control and regulate complex mobile or stationary hydraulic systems. Modular system with Basic module, different expansion modules and software for configuration.

The compact hydraulic power pack type HICON’s encapsulated design offers protection against temporary immersion in water according to protection class IP 67. The pump module integrates a gear pump and

The connection block type B is suitable for single-circuit pumps. A pressure switch can be mounted directly on the connection block. The type B variant can also be used in combination with differentia