Product Finder - HAWE Hydraulik

The range includes compact hydraulic power packs, standard hydraulic power packs and mounted valves.

Hydraulic power packs

The hydraulic pumps from HAWE Hydraulik are characterised by their compact and robust design. They are suitable for low pressure, medium pressure and for applications involving high pressure of up to 1500 bar. The range includes single pumps (radial piston pumps, axial piston pumps, air-driven hydraulic pumps, hand pumps) and pump elements. They can be supplied individually or assembled into a hydraulic power pack in the form of a compact hydraulic power pack or standard version.

Pumps

The range includes directional spool valves, directional seated valves, pressure control valves, flow valves and check valves – either as individual components or combined in valve banks.

Valves

A connection block represents the connecting link between the hydraulic power pack and the hydraulic control. The connection blocks described here are suitable for combining with HAWE compact hydraulic power packs.

Manifolds, valve banks

Integrated solutions combine different functions or modules within a single system. They are designed and optimised to ensure seamless interaction and enable data transfers between the various components. The integrated solutions are assembled from a comprehensive modular component kit in line with the customer’s specific requirements and delivered ready to install. They are employed in the most diverse range of industries and machine types.

Integrated solutions

HAWE Hydraulik offers additional electronic components tailored to our hydraulic components. These include mobile controllers, which actuate complex hydraulic systems. The range includes electronic controls, proportional amplifiers and line connectors.

Electronics

Energy packs, also called rechargeable battery packs, consist of multiple battery modules linked together in a parallel or serial circuit. They act as universally usable electrical energy stores. In a parallel circuit, the energy packs can be expanded to form a battery system in order to reach the machine’s desired range.

Battery and Battery Management

Hydraulic clamping cylinder generate a pressure-controlled clamping force at the piston. Without pressure the clamping pistons return to their initial position. Axial piston motors are constant motors. They have a constant displacement and therefore generate a fixed rotation speed dependent on the flow rate.

Cylinder, motor

Various fittings are available for hydraulic accessories, which are used to connect these hydraulic devices to the pressure lines of HAWE hydraulic power packs and valves in various assembly situations.

Accessories

For downloading configuration software, support files and documentation for HAWE electronic products.

HAWE Software

Proportional directional spool valves are a type of directional valve. They control the direction of movement and the velocity of individual or multiple hydraulic consumers actuated simultaneously. Control is independent of the load and continuous.

Proportional directional spool valves

On/off directional spool valves are used to control the direction of movement of consumers such as hydraulic motors and hydraulic cylinders.

Directional spool valves

Pressure valves are used to control or limit the system pressure in a plant or to switch in response to a signal pressure.

Pressure control valves

Directional seated valves are a type of directional valve. Their function is to direct the flow of hydraulic medium in certain directions, therefore connecting the relevant connections, or shutting off the flow with zero leakage. By this means they control the movement of the actuators in a hydraulic system.

Directional seated valves

Check valves block volumetric flow in one direction while enabling it in the other direction.

Check valves

Flow valves influence the flow rate in hydraulic systems.

Metering valves

Load-holding valves are a type of pressure valve. They prevent loads on cylinders or motors dropping in an uncontrolled manner. For this purpose they are pre-loaded with a pressure setting that is higher than the largest possible load. A hydraulic piston controls the opening of the valve to achieve the required lowering velocity.

Over-center valves

Pressure-dependent shut-off valves are a type of pressure control valve. When a set pressure value is reached and exceeded, they block the flow to consumer line B with zero leakage. The valves will open again if the pressure on in flow side A falls below the set value defined by the spring tension.

Shut-off valves, follow-up valves, two-stage valves

Pressure-limiting valves and sequence valves are types of pressure valves. Pressure-limiting valves safeguard the system against excessive system pressure or limit the operating pressure. Sequence valves generate a constant pressure difference between the inlet and outlet flow.

Pressure limiting valves, sequence valve

Pressure reducing valves are a type of pressure valve. They maintain a largely constant outlet pressure even at a variable (higher) inlet pressure.

Pressure reducing valves

Proportional pressure-reducing valves are a type of pressure control valve. They remotely control the pressure in hydraulic systems continually and electrically.

Proportional pressure reducing valves

Proportional pressure-limiting valves are a type of pressure control valve. They remotely control the pressure in hydraulic systems continuously and electrically.

Proportional pressure limiting valves

CLHV - Over-center valves

LHDV - Over-center valves

LHK - Over-center valves

LHT, LHTE - Over-center valves

OSCA - Over-center valves

Top of page