Mobilsteuerung Typ ESX-3XM
7 | 8
Climatic and mechanical tests IP Protection classes IP 67, IP 69K Environmental testing: Cold (storage and operational) 24 hrs. at -40 °C Environmental testing: Dry heat (storage and operational) [...] and mechanical tests Road vehicles - Environmental conditions and testing for elec- ISO 16750-5:2003-12 trical and electronic equipment: Chemical loads Flowing mixed gas corrosion test Sulfur dioxide SO2 [...] Environmental testing: Shock 50 g/11ms, sine wave, 10 shocks/ ISO16750-3:2007 axis (IEC 60068-2-27:1995-03) Environmental testing: Bump Bump, 30 g/6ms, sine wave, 1000 shocks/axis Environmental testing: Damp heat
Montageanleitung - Proportional-Verstärker Typ EV1M3
potentiometer rotation
Test points
TP1 TP2 TP3 TP4 Test point 1 (+) for current feedback measurement, 100 mV ≙ 0.5 A Test point 2 (-) for current feedback measurement, 100 mV ≙ 0.5 A Test point 3 to adjust [...] adjust ramp UP Test point 4 to adjust ramp DOWN
TP5-6 Test points for adjusting the ramp time (see D 7831/2 Chapter "Assembly, operating and maintenance information")
Bridges (Jumper)
Jumper placed Jumper [...] Amplifier connection: Connect the proportional solenoid to terminals 2 and 3. Connect voltmeter V1 to test points TP1 and TP2 (to measure the coil (induction) current) . Connect the target value potentiometer
Mobilsteuerung Typ ESX-3XL
09) ISO 16750-4:2006 (IEC 60068-2-14:2000-08) Climatic and mechanical tests Flowing mixed gas corrosion test Temperature step test Solarradiation ISO 16750-4:2006 (IEC 60068-2-60:1995-12) ISO 16750-4 DIN [...] disturbance by conduction and coupling (data, signal), test level 4 Pulse a: -80 V, 1h Pulse b: +80 V, 1h ISO 7637-2:2004-09, DIN 40839-1:1992-10 Electrical tests Safety of machinery – electr. equipment of machines [...] reference and supply offset ISO 7637-3:1995, DIN 40839-1:1992-10 Open circuit test - Single line interruption Open circuit test - Multiple line interruption Short circuits - signal lines Short circuits -
Kegel-Sitzventilpatrone Typ SP 3
3/2 way poppet cartridge valve SP32
Meßbedingungen Medium HV46 Temperatur 30° C Viskosität 80 mm2/s test conditions medium HV46 temperature 30° C viscosity 80 cSt
Meßaufbau „Leckrate“ / Texting fixture
Hochdruckschlauchleitung Typ H3/H4
designed to deliver maximum performance when used in fluid technology. Every high pressure hose type was tested in accordance with DIN 20 024 during development. The anticipated service life is at least one million
Hydraulisches Verriegelungssystem (HLU) für Personenrückhaltesysteme
Specification for Physical Information to be Provided for Amusement Rides and Devices Standard Guide for Testing Performance of Amusement Rides and Devices Standard Guide for Inspection of Amusement Rides and Devices
Hydraulisches Verriegelungssystem HLU LE-X (M) für Personenrückhaltesysteme
Specification for Physical Information to be Provided for Amusement Rides and Devices Standard Guide for Testing Performance of Amusement Rides and Devices Standard Guide for Inspection of Amusement Rides and Devices
Hydraulisches Verriegelungssystem (HLU) für Personenrückhaltesysteme
Specification for Physical Information to be Provided for Amusement Rides and Devices Standard Guide for Testing Performance of Amusement Rides and Devices Standard Guide for Inspection of Amusement Rides and Devices
Produktdokumentation PSL-CAN-Knoten
supply upper limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 A.6.17. Self test max delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 A.6.18.
Produktdokumentation PLVC
12.7. Projektverwaltung (Beispiel-Projekt voreingestellt) . . . . . . . . . . . . . . . . . . 151 Test und Inbetriebnahme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 Variable