Searched for "*".

All equipment necessary for a defined measuring procedure . This includes the sensors and components used to distribute, store and process the signals. The respective system structure is specified thr

Primary element of a transducer, which directly determines the measured variable and converts it into a mechanical or electrical signal suitable for further processing. In practice, the term sensor is

Back pressure valve with the task of preventing pulling loads on cylinders or motors from causing uncontrolled lowering. For this purpose, it is pre-loaded to a higher pressure than the pressure corre

Hydraulic cylinders , which automatically switch at both ends using an integrated switching device.

Sub-field of diagnostic technology, in which an electronic system, e.g. a control or a measurement system regenerates a simulation using (generally present) microprocessors, which are used to monitor

The negative excess pressure created in the intake stroke of the displacement units sucks up the oil automatically. This suction capacity is highly dependent on the construction design of the pump, it

A hydrostatic transmission with secondary adjustment works with an impressed flow ( constant current network ) and has a constant pump and a variable motor, which performs the torque setting itself. T

Process to control the rotation speed by adjusting the torque with a reversible hydraulic motor in a system with impressed pressure ( constant pressure network ( Figure S 43 ). The rotation speed of t

Information on the maximum quantity of information held by the memory. For digital memories, the memory capacity is expressed in storage cells (bits) or addressable memory locations ( words , bytes).

The usable volume ΔV of a hydraulic accumulator results from the nominal volume V0 of the accumulator, the precharge pressure p0 and the upper accumulator pressure p2 and lower accumulator pressure p1