Searched for "*".

A binary signal (two-point signal) is a single-parameter digital signal with only two value ranges for the signal parameter, e.g. O and L (DIN 19 226).

Processing of binary input signals that are not part of a binary coded digital information representation into binary .

Systems in which only binary signals are transferred. They can contain, along with discontinuous two-point elements, also continuous elements provided the binary character of the overall system is ret

Closed loop structure in a binary system that contains at least one binary memory element.

Non-contact seals (e.g. gap seals ) are not suitable for gases due to their lower viscosity unless they are combined appropriately with a liquid as a barrier medium ( Figure S 73 ). Depending on the d

Reverse of the Vane pump principle , in which two vanes are adjustably arranged in the housing at an angle of 180°, which, together with two cams on the rotor, create two suction chambers and two pres

Unlockable check valve with twin design. The shut-off unit is arranged to compensate for leaks from directional valves with a piston structure between the consumer (e.g. cylinder ) and the directional

The most common application of a charge pump in hydraulic systems is "charging" a pump in the open circuit (due to improved filling in the priming phase, it can be run at a higher rotation speed) and

Low-pressure circuit in a hydrostatic transmission with the task of constantly replacing the small oil volume with fresh oil in a closed circuit. For this purpose, there is a feed circuit from the Cha

Pressure at the inlet to a device or a system created by an auxiliary system (DIN 24 312).