Searched for "*".

Are characterised by numerical values of the individual variables with which the system can be operated without interruption (CETOP RP 100).

Measure in kbit/s for the amount of data transmitted (and as a consequence for the transmission speed) between two computers or a computer and a peripheral. baud

Reduction of the piston velocity at one or both ends of the stroke to reduce mass forces. If the ends of the stroke are at the end positions of the piston, end position damping is used, which requires

Above all on pressure valves the closing element (cone or piston) has a damping piston to prevent undesirable oscillations (chattering) (Figure D 3) . It must be designed such that the damping is only

High pass filter assembly that measures the pressure oscillations in the drive and controls the downstream damping devices . This assembly can operate mechano-hydraulically (e.g. hydraulic accumulator

Triggers an actual damping process that stabilises the drive as the load pressure changes. Damping devices can operate mechano-hydraulically as throttle valves or bypass valves or electro-mechanically

Dynamic stabilisation method for oscillations based on the removal of energy by throttling, leakage (bypass) or also friction with the special feature that it can only be activated if oscillations occ

Measure of the decay of an oscillation in a delay element of second order. D = 0 signifies an undamped continuous oscillation and D = 1 an aperiodic oscillation (Figure D 5). For reasons related to co

Pressure that is produced during the damping process in cylinders and that must absorb the masses moved (as a rule piston + load).

Elastomer seal that is designed and installed such that it seals the damping piston as it moves in, and at the same time leaves open a precisely defined gap through which the displaced air escapes (Fi