Searched for "*".

Standard measure for the hardness of elastomers , in which the penetration depth is measured in a test specimen. A distinction is made between Shore A for softer specimens (up to approx. 90 Shore A) a

Depending on the requirements in terms of accuracy, servo cylinders ( Figure S 53 ) are used with two construction designs, which differ in terms of the bearing of the piston and piston rod: 1st cylin

For use in this is a group of continuously adjustable valves, in which a constant input signal brings about a proportional. A distinction is made between mechanical-hydraulic servo valves ( copying va

In general : Summary of all processes that convert a weak input signal into a greatly amplified, proportional (power amplification). In fluid technology : Servo technology stands for an area that uses

Variable pump which is adjusted by an electro-hydraulic closed circuit position control system according to the requirements of a parent control system such that it always moves an exactly defined flo

In general, a servo motor is a high-quality hydraulic motor, which is used particularly in the electro-hydraulic . The servo motor should therefore have the following characteristics: Uniform movement

Area of hydraulic systems, which uses the servo technology ( electro-hydraulic control technology ) to achieve highly precise hydraulic drives using suitable . The hydraulic control elements are the c

In general : Drive elements activated by an amplifying auxiliary force (e.g. power steering, servo brake). In fluid technology : Collective term for an automatic drive system, which contains a power a

Term used for operating elements (cylinders, motors, swivel motors ), which are controlled by a continuously adjustable valve . We sometimes use this term in place of servo cylinder .

Cylinders, which do not meet the standards or not all of the standards ( standard cylinders ) but are offered by their manufacturers as standard. The deviations apply mainly to pressures and the pisto