Searched for "*".

A lever with a roller, which transfers a switching movement to the element to be moved.

Elements used to create removable connections for pipelines and devices. They are manufactured for three pressure stages (LL - very light, L - light, S - heavy). A distinction is made between three di

Proportionality factor between the pressure loss and dynamic pressure related to the circular cross section, when flowing through a straight of length 1 and diameter d. λ depends on the Reynolds numbe

In connection with valves , this means that the devices are integrated into the pipelines.

Valve which protects the lines to a cylinder secured so that it can no longer make any undesired or hazardous movement in the event that the supply line breaks.Burst pipe protection is mainly used in

Ring-shaped (loop) hydraulic fluid line to supply multiple consumers. Compared with a stub line, the loop line enables: a balanced supply of pressure, i.e. there are smaller pressure fluctuations and

Axial piston machine ( Axial piston pump or Hydraulic motor ) with a rotating cylinder block in which the piston strokes are caused by a fixed swash plate with a largely adjustable drive angle (max. a

Axial piston machine ( Axial piston pump or Hydraulic motor ), in which the cylinder block is turned by a drive flange connected to the drive shaft via the piston rods. The cylinder block is guided us

Device used to connect hose lines. The actuation of the quick connector coupling generally takes place by turning it by approximately 90° and may have a on both sides to enable the separation of hose

To reduce the activation time of a DC solenoid its coil is placed upstream of an Ohmic resistance R v and increased voltage is applied. This reduces the activation time. As the solenoid voltage falls