Searched for "*".

Flow control valves type CSJ are screw-in valves. These valves can be screwed into the easily produced threaded holes.

The directional spool valve bank type SWS is available with series connection. The consumers can be operated with on-off or proportional control. Versions are available for usage in potentially explos

In the case of the air-driven hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a s

The load-holding valves type LHK and LHT are suitable for applications that are not particularly prone to oscillations. Shock valves and shuttle valves with or without restrictor check valves can be

The external gear pump type GHP is a constant pump with a closed pump housing. It is available as a separate hydraulic pump.

The compact hydraulic power pack type H consists of the tank, an integrated motor and the gear pump directly attached to the motor shaft. This compact design results in a very small installation packa

The mini hydraulic power pack type HR is equipped with an internally pressurized radial piston pump. A reversing function is possible by changing the motor’s direction of rotation. No directional valv

The pressure reducing valve type ADM is directly controlled. The valves have an override compensation. If for instance the secondary pressure rises above the set value due to external forces, then the

A connection block represents the connecting link between the hydraulic power pack and the hydraulic control. The connection blocks described here are suitable for combining with HAWE hydraulic power

The pitch system is used to adjust the pitch angle of the rotor blades in wind turbines in order to set the optimum blade position to match the wind direction. This optimizes the energy yield and at t