Searched for "can".

blocks in one. This means that up to three double-acting consumers can be supplied with one valve section. Up to eleven valve sections can be combined in a modular system. At the same time, this design not [...] not only allows the main functions to benefit from the advantages of CAN bus control, but also the auxiliary and supporting functions. This makes the use of MICK particularly advantageous in mobile machines [...] of interest for electrification projects in mobile machinery. Automation is also supported via the CAN bus control of all functions, the main and auxiliary functions. Visit HAWE at bauma in Munich from

PSL-CAN from HAWE Hydraulik, the entire valve block is connected to the on-board electrical system with just one plug. System feedback and parameter adjustments are carried out directly in the CAN head [...] valve block, thus relieving the main control system and the bus system. Different sizes and actuators can be combined in one block. But also the combination of b/w switching control blocks with the proportional [...] makes it possible to pre-select different settings and working modes in hydraulic controls. Sensors can also be integrated to record information about soil conditions, crop yields and other relevant parameters

individual consumers. As a result, up to three double-acting consumers can be supplied with one valve section. Thus, for example, MICK can realize the functions previously housed in 3 separate control blocks [...] interesting for electrification projects in mobile machines. Automation is also supported via the CAN bus control of all functions, main and secondary functions. The manifold MICK in the concrete pump

By switching from a valve control by pulse width modulation to CAN bus, the valves can be addressed precisely and function parameters can be adjusted easily. The start and end position of the spool valve [...] PSL-CAN Lite. The entire valve bank is connected to the bus system of the machine with only one connector plug. This keeps the cabling effort very low and shortens the commissioning time. The CAN-Lite [...] CAN-Lite actuation can be combined with the fully equipped CAN actuation version with spool position feedback from HAWE in one valve bank. Depending on the requirements for precision and repeatability, the machine

handheld service device from HAWE Hydraulik that was developed for the PSL-CAN proportional directional control valve with its onboard CAN control. The integrated wireless module and embedded web server enable [...] the user.” CANpal can be connected to all common connector types, such as DT, AMP, and AMS. This means that this service device is well prepared for use around the globe. The PSL-CAN valve manifold is [...] powerful, very compact valve control system with onboard CAN bus control from HAWE Hydraulik. It is available from HAWE in four sizes, which can also be combined with each other in a manifold as required

ROVO. Alternatively, it can be precisely controlled externally via the standard integrated CAN interface. Various optional additional equipment is available for the ROVO, which can be selected depending [...] to its design as a removable battery with a plug-in system, it can be changed within two minutes without tools. This means that the range can be extended as desired. The latest generation of lithium-ion [...] platform is "Made in Austria." It measures 1.20 x 1.20 m and weighs only 300 kg. This compact powerhouse can transport up to 500 kg of payload and travel at speeds of up to 30 km/h, even on rough terrain. With

application of a servo motor instead of an asynchronous motor can already achieve energy savings in the mid-2-digit percentage range. Existing systems can also be converted into servo drives, as the cylinder [...] for the pump speed-controlled and valve-controlled drives from HAWE Hydraulik: Their high dynamics can increase the cycle speed of the press cycle and thus the overall productivity of the machine. In the [...] interfaces remain identical. With the ePRAX® drives from HAWE Hydraulik, energy savings of up to 80% can be achieved compared to conventional press controls. Here, the servomotor dynamically adjusts the delivery

event of a failed electric power supply. In addition, a hand pump can be attached directly to the hydraulic power pack. With this, the brake can be activated manually in the event of maintenance. With its compact [...] Hydraulik builds customer-specific solutions that can also be mounted directly on the rotor brake, thus avoiding unnecessary cable lengths. The power units can be arranged both horizontally and standing. As [...] manifold, which is carried out in the HAWE Hydraulik solution with directional seated valves. You can choose between control blocks with screw-in valves or the service-friendly functional modular design

banks from the HAWE modular system, a customer-specific solution can be configured quickly and easily with this unit. The configuration can also be carried out online in the HAWE customer portal. The user [...] measuring functions. The measured values of the integrated multi-sensor, including the motor speed, can be transmitted to the higher-level machine control system via an IO-Link interface and processed there [...] outputs is also available. In this case, any measured variable, such as temperature and fill level, can be assigned to each switching output with the help of a PC application (software) provided by HAWE

modular design, various sizes of gear pumps and motors can be combined. By reversing the direction of rotation of the motor, a reversing function can be controlled without a switching valve. The integrated [...] power unit is connected to the main control system via CAN bus, the standard interface in mobile hydraulics. Status values on the operating status can be read out by the user easily and at a high data rate