Idle circulation valve
the idle circulation valve is generally placed on the container. Either a hydraulically actuated 2/2 directional valve or an externally actuated pressure-limiting valve is used as the idle circulation
Corner power
that is given by the max. flow rate and the max. pressure (Figure E 1) : P E = Q max · p max = M 2 · 2πn 2. On constant pumps and variable pumps with pressure controller the corner power is also the power
Piston for rapid traverse
ensured that the main piston can draw in unpressurised oil during forward movement (Figure E 2) . Figure E 2: System with piston for rapid traverse
Damping of cylinder motion
the piston, end position damping is used, which requires design measures on the cylinder (Figure D 2) . Braking at any stroke position (e.g. as the tool approaches the workpiece) is only undertaken with [...] controlled braking valves or by means of the corresponding operation of proportional valves . Figure D 2: Damping of cylinder motion
SW
Configurator Configurator サイズ 2 ねじタイプ 回路圧力 315 流量 (lpm) 25 ドキュメント ダウンロード Configurator Configurator prev next サイズ 回路圧力 流量 (lpm) ドキュメント Configurator 1 ねじタイプ 315 12 ダウンロード Configurator 2 ねじタイプ 315 25 ダウンロード Configurator [...] HAWE Kompakt データシート 方向切換スプールバルブ タイプ SW 2: D 7451 技術データ - タイプ SWP サイズ 1 ねじタイプ, プレートタイプ, バルブブロック 回路圧力 315 流量 (lpm) 25 ドキュメント ダウンロード Configurator Configurator サイズ 2 ねじタイプ, プレートタイプ 回路圧力 315 流量 (lpm) 25 ドキュメント [...] コンパクトカタログ: HAWE Kompakt データシート 方向切換スプールバルブ タイプ SW 2: D 7451 技術データ - タイプ SWR サイズ 1 バルブブロック 回路圧力 315 流量 (lpm) 12 ドキュメント ダウンロード Configurator Configurator サイズ 2 バルブブロック 回路圧力 315 流量 (lpm) 25 ドキュメント ダウンロード Configurator
Pressure gauge
chambers. Pressure chamber (2) is connected to the atmospheric pressure. Chamber (3) is subjected to the operating pressure at the measuring point. A pressure difference between (2) and (3) causes the diaphragm [...] free end of the tube to undergo proportional linear deflection. It is relayed via the connecting rod (2) to the pointer (3) and displayed on the scale (4). Figure M 1b): Dynamic pressure gauge with diaphragm;
VP
製品タイプ 方向切換シートバルブ タイプ VP 製品説明 シート形方向切換バルブ タイプ VPはマニホールド取付け用バルブです。ボールシートバルブの仕様となっています。様々な操作方法の2/2、3/2および4/2シート形方向切換バルブがあります。すべてのポートは同様に圧力耐性があります。 シート形方向切換バルブ タイプは、特に高粘性媒体 (例えばグリース) に適しています。適切な接続ブロックにより直
VP
製品タイプ 方向切換シートバルブ タイプ VP 製品説明 シート形方向切換バルブ タイプ VPはマニホールド取付け用バルブです。ボールシートバルブの仕様となっています。様々な操作方法の2/2、3/2および4/2シート形方向切換バルブがあります。すべてのポートは同様に圧力耐性があります。 シート形方向切換バルブ タイプは、特に高粘性媒体 (例えばグリース) に適しています。適切な接続ブロックにより直
Electric-hydraulic analogy
Fluidlexikon Electric-hydraulic analogy Figure A 19: Electric-hydraulic analogies Figure Table 2 A: Electro-hydraulic analogies The understanding of some processes in fluid technology is improved if use [...] electrical and hydraulic technology, in particular the significance of hydraulic resistances (Table A 2) . These analogies can be used even on circuit diagrams and in some circumstances form the basis for
Energy saving in hydraulics
and energy loss as well as to recover energy . Specifically these are the following measures (Table E 2) : Design improvements on pumps and valves by the manufacturer, Selection of designs with better efficiency [...] sensing, closed circuit , motors with secondary regulation), Measures for energy recovery. Figure Table E 2: Measures for saving energy saving in hydraulics