Hakuteksti "*".

The pressure reducing valve type CDK is a screw-in valve, and can be used in control blocks. The bore-holes required for mounting are easy to create. All versions oil-tight when closed.

The type RSV additionally contains a check valve.

The check valve type RK, RB, RC and RE can be screwed-in, type ER can be plugged-in. The spring-loaded ball check valve type RK, RB and ER is very robust and insensitive to soiling. Type ER can be

The compact hydraulic power pack type INKA consists of the tank, the integrated motor and the radial piston pump or gear pump directly attached to the motor shaft. The directly mounted electronic comm

A 2-way flow control valve (dual lowering brake valve) type DSJ is used to limit flow rates in both flow directions independent of load pressure. The valve is available for various flow rate ranges a

The electronic pressure transducers type DT 2 can be used in almost all areas of industrial and mobile hydraulics. The electronic pressure transducers DT 2 are available with different analogue outpu

The filter elements type HFC, HF and HFE are preferably used in small pressure oil circuits without significant flow rates, in which the oil column on the consumer side is more or less pushed back and

The external gear pump type Z is a constant pump with a closed pump housing. It is available as a separate hydraulic pump. To set up a dual-stage pump type RZ (, ) the type Z described here can also

The ready-for-connection compact hydraulic power pack type HKL includes an electric drive that runs in oil. A fan, which effectively dissipates the heat from the hydraulic system, is mounted on the ho