Hakuteksti "*".

Device in which the operation pressure p 1 of the primary pressure system is brought to a higher pressure p 2 in the secondary system. The pressure boost factor is given by the ratio of the primary an

Maximum deviation of the average flow rate signal function from the straight line of the average flow rate amplification. Stated as a percentage of the nominal flow rate .

HFC fluid

In general, a servo motor is a high-quality hydraulic motor, which is used particularly in the electro-hydraulic . The servo motor should therefore have the following characteristics: Uniform movement

Thermoplastic elastomers

Fast, bistable memory element for saving 1 bit. A number of flip flops connected in series are used as a shift register.

Highest hydrostatic power of a pump/motor/ transmission that is given by the max. flow rate and the max. pressure (Figure E 1) : P E = Q max · p max = M 2 · 2πn 2. On constant pumps and variable pumps

Programming method , in which the desired information is input by demonstrating it. This happens by performing a cycle step by step and entering the values calculated for the position, velocity etc. i

Dirt-holding capacity

sealing compatibility index DVI