Hakuteksti "*".

->Silencer

Power at the pump drive shaft at a given point in time or under given load conditions.

This is when functional units or even physical units are associated with a defined type of behaviour and can be linked together based on defined rules (EDIN 19 226, Part 5).

System whereby electrical signals are converted into light signals, relayed inside optical fibres (glass or plastic fibres) and then converted back into electrical signals ( Figure L 19 ). Optical fib

Curve based on identical (constant) power in a rectangular p-Q system Power is calculated as follows: P = p · Q

Pressure resulting from an external load (DIN 24 312).

The overall costs for a plant consist of the procurement costs A, ( Figure K 33 ) and operating costs K, which can fluctuate considerably in the field of hydraulics. They will depend primarily on over

Reversal of a pulse valve by purging (depressurising) the piloting line. Not used very often now, because switching may also occur in the event of an unintentional pressure drop.

Measuring system in which the information on the actual (absolute) position is always available. For this purpose the sensor (e.g. glass measuring scale) must provide additional information. This info

Defect caused by the operation of the system, such as the loosening of components, failure of safety devices, maintenance defects, consequential damage as a result of wear, corrosion, ageing etc. as w