Hakuteksti "*".

Computer subsystem that undertakes the mathematical operations of a digital system . The ALU is the "heart" of the microprocessor. It operates between the registers and the control unit. For this purp

Low-pressure accumulator (3 to 6 bar) to create a traverse speed in the case of large cylinders, for which there is no more pump for rapid traverse . The pre-charge container is refilled with the refl

Control , in which the signal action is synchronised with a clock signal (DIN 19 237). The clock signal comes from a clock device (clock, clock amplifier). This means that changes to the input signals

Assembly option for hydraulic valves whereby the required valves for a function — e.g. directional valve, flow valves , high response proportional valves are assembled on top of each other on a base p

The speed ratio of a hydrostatic transmission is defined by the ratio of the pump speed n 1 to the motor speed n 2:

Characterisation of the nature and scope of the intervention in a control system by the operator and by feedback from the system to be controlled. Here in accordance with DIN 19 237 a differentiation

Sum of all the pressure losses that occur at the various throttling points in a system (i.e. wherever there is a cross-section constriction). Another type of throttle loss occurs if in a system with c

Intake characteristic

Electrical impulse, which brings the storage elements of a system to the initial position (DIN 19 237).

The resistance that opposes the relative movement of surfaces in contact with one another. Friction is the main cause of the unwanted conversion of mechanical energy into heat and therefore energy los