Hakuteksti "*".

Provides information on the behaviour of the controlled variable with a changing reference variable , but constant disturbance variable . The controlled variable responds to external effects on the co

Cylinders whose stroke is significantly shorter than the piston diameter ( Figure K 41 ). Short stroke cylinders are used in hydraulics for things like tensioning or closing processes.

Operating viscosity

Drive system, in which the flow rate for all movements is provided directly from pumps (without a storage facility). If different speeds are required, constant pumps are used in throttle control and v

In accordance with ISO 1219-1 load-holding valves are classed in the group of pressure control valves. They prevent double-acting consumers (such as hydraulic cylinders and hydraulic motors) that have

Piloted check valve that is used to fill the cylinder chamber behind a piston moving rapidly under its own weight or with a piston for rapid traverse with unpressurised oil from the tank. The high vel

Throttle valve that is designed as a screw-in cartridge.

Pressure that is defined by the person planning a device or installation to fulfil the intended functions. It corresponds to the nominal basis according to DIN 40 200 (DIN 24 312).

The arithmetic mean or the average of a series of measurements with n independent individual values x, 1 ... x n, termed x̄ for short, is defined by (VDI-VDE 2600).

Collective term for all electronic signal processing and switching technology that has analogue behaviour with the characteristic that the output variable changes corresponding to the change in the in