Hakuteksti "*".

The pressure-limiting valve type NPMVP is a pilot-controlled valve in a spring-loaded ball version. The pressure can be set to up to 700 bar. The proportional pressure-limiting valve type NPMVP is des

PLVC programming environment, PC software installation program.

The valve block type HSV provides the function of a 2/2-directional seated valve with electrical actuation for lowering the load. Adjustable throttle valves or flow control valves independent of the l

The Power Distribution Unit PDU is used to connect up to 4 or up to 8 batteries in a parallel circuit and connect them to an electrical drive system. Up to 5 or up to 10 outputs are available for the

HSA and HSE clamping cylinders can transmit very large forces in the smallest installation space. Type HSE is a screw-in cylinder for installation in a fixture or base body, type HSA is mounted on a s

The compact hydraulic power pack type MPN and MPNW consists of the tank, the integrated motor and the radial piston or gear pump directly attached to the motor shaft. Single-circuit or dual-circuit sy

The directional spool valve bank type SWS is available with series connection. The consumers can be operated with on-off or proportional control. Versions are available for usage in potentially explos

The hydraulic press drive type SAMB consists of two cylinder blocks including suction valves and either one pump block SAPB or one pump module SPLM consisting of pump, filter, coupling, and motor flan

The external gear pump type GHP is a constant pump with a closed pump housing. It is available as a separate hydraulic pump.

Visual Studio Code is a source code editor from Microsoft. It is required to edit the programme code and to create (compile) the software from it. It can be downloaded from the official website: https