Hakuteksti "*".

Elements used to create removable connections for pipelines and devices. They are manufactured for three pressure stages (LL - very light, L - light, S - heavy). A distinction is made between three di

All signals of sensors that are used to check device functions. Test signals are also all signals routed over interfaces to monitor the operating status of the device, e.g. actual value, solenoid curr

Fluid valve with binary behaviour, i.e. it moves from one switching position to another (e.g. Open – Closed) without adopting an intermediate position.

Oldest form of elastic seals . They can be used as two lip seals for sealing at the inner and outer ring (Figure N 9 a) or as a single-lip ring with an adhesive section for single-sided sealing. The s

Hydrostatic displacement machines , displacement chamber machines , pump with banked pistons/in-line piston pump

Ability of a filter to retain specific test contamination in a hydraulic fluid with a specified contamination concentration under defined test conditions (CETOP RP 100). As the test method for filtrat

Electrical arrangement to split an input signal into two .

In terms of fluid technology there is no closed regulatory system in terms of safety technological requirements. Rather, these are distributed over a series of rules, regulations and standards of the

Stroking of hydrostatic machines

the signal parameter can assume all values of an interval (e.g. all voltage values between -10 and +10 V if the voltage is the signal parameter) (DIN 19 225).