Hakuteksti "*".

The degree of energy loss in a hydraulic system also depends on the type of flow. Flow is divided into laminar and turbulent flow: In the case of laminar flow , intended stream tube filaments run para

Servo motor

Power losses in pipes are caused by the in the pipe, which consists of friction losses and form-related losses — neither of which are related to pressure. As such, the efficiency of pipe can be expres

Flow that remains constant over time.

Processor with a reduced instruction set, which is specifically designed to rapidly process signals as required for arithmetic tasks. Signal processors are therefore used for rapid solutions of the Fo

. Welded nipple pipe screw fittings with connectors and union nuts are standardised in DIN 2353. The welded nipples with O-rings are in accordance with DIN 3865.

The sensitivity of hydraulic devices to dirt is determined by the interaction between functional gaps and the particle size of the solid dirt. In doing so, a distinction must be made between hard and

Hose cut to length, with the necessary connection fittings on both sides.

Overlap

On a logarithmic scale, this states the entire sound power W emitted from an acoustic radiator in relation to a specific output W o of 1 pW. The sound power level is therefore a machine-specific varia