Hakuteksti "*".

The connection blocks type AB and AL are suitable for single-circuit pumps. Type AB has a modular design. It comes as standard with a pressure-limiting valve that acts as a safety unit for a connected

The clamping module type NSMD has the standard connection pattern nominal size NG 6. It controls power-driven clamping devices, e.g. hydraulically-driven hollow and solid clamping cylinders for automa

In the closed state the check valve type DRH has zero leakage. The type DRH is a twin check valve for double-acting consumers.

The electronic proportional amplifier EV2D is a multi-channel amplifier for controlling or regulating up to six consumers.

Flow control valves type SJ are screw-in valves. They can be integrated into the line system using a housing. For purely pump circuits, the excess oil flow on the inflow side must be discharged via a

The pressure filter type PFM contains a filter element through which the fluid flows from the inside to the outside. It can be replaced without drips or soiling using standard tools. The ratio of size

The mobile controller type ESX is a freely programmable PLC with an integrated proportional amplifier. The programming languages LogiCAD, C++ and CoDeSys are available for application programming purp

The pressure relief valve type B protects from exceeding the maximum allowable pressure for the system or limits the working pressures.

HAWE Hydraulik’s steering systems are used to control pleasure craft and recreational boats. They steer the boat propulsion system according to the direction of travel chosen by the operator. The atta

HAWE eControl App for the configuration of HAWE EV2S-BT proportional amplifiers.