Hakuteksti "*".

Feedback of the load pressure in hydrostatic transmissions . Negative load pressure feedback increases damping for the drive, but without any influence on natural frequency or velocity amplification .

The state diagram shows the function sequence of one or more work units and the control technology links of the accompanying structural elements at two coordinates. At one coordinate, the state, e.g.

Angles can be measured using analogue or digital methods. Analogue methods include rotating condensators, the capacity of which is a measure of the angle of rotation or a rotating potentiometer. Tacho

Hydraulic pump , consisting of several single pumps working in series. The aim is to achieve a higher pressure than permitted by the single pump. Sample application: Internal gear pump , which reaches

Adaptation of controller properties to the respective task by changing the control parameters with the aim of optimising the controller .

Specific type of seal, e.g. roof-shaped seal , u-shaped seal.

Oil quantity in compressed air after passing through the lubricated compressors and downstream separation systems (cyclone separators) and after leaving the storage tank. The residual oil content is s

Transfer elements

Also a software system, consisting of a structured quantity of program parts and used to process a set of tasks or its component parts. The structure of the individual program parts will depend on bre

Characteristic whereby a measuring instrument does not change its zero point under external influences (e.g. temperature), even over the long term.