Hakuteksti "*".

The pump element type MPE and PE is the basic component of all HAWE radial piston pumps. The double pump element type DMPE consists of a low pressure and a high pressure piston. When the low pressure

The connection blocks type AN, AL and NA are suitable for dual-circuit pumps. They feature a pressure-limiting valve and one or two shut-off valves. Directional valves are integrated in some cases or

The throttling directional spool valve type DL influences the speed of the consumer by throttling the pump circulation via a parallel circuit (bypass control). The close fit of the spool in the thrott

PLVC programming environment, PC software installation program.

The check valve type RK, RB, RC and RE can be screwed-in, type ER can be plugged-in. Type RE is a plate valve without a spring. Type RE is suitable for isolating pressurising loads or as a foot val

Flow control valves type CSJ are screw-in valves. These valves can be screwed into the easily produced threaded holes.

Hydraulic power units for brake control reliably fulfill their task within the safety concept of wind turbines. Based on customer specifications, they build up and release the necessary brake pressure

Programmable logic valve controls control and regulate complex mobile or stationary hydraulic systems. Modular system with Basic module, different expansion modules and software for configuration.

A connection block represents the connecting link between the hydraulic power pack and the hydraulic control. The connection blocks described here are suitable for combining with HAWE compact hydrauli

The load-holding valve type LHDV has special damping characteristics. It is used particularly in conjunction with proportional directional spool valves, e.g. type PSL and PSV. Shock valves and shuttl