Hakuteksti "*".

Electrical, electronic, pneumatic, mechanical or hydraulic component capable of performing a logic function ( Figure L 26 ).

Laplace transformation is a method for solving linear differential equations with constant coefficients based on given initial conditions. It can also be used for fault functions which give the value

General form of resistance. Impedance Z is a complex physical variable (actual and notional element), which takes the following form R = resistive element of resistance jωL = inductive element of resi

Device for the conversion of analogue data that are available in the form of a specific angular position of a shaft into coded digital data by using a coded disc that is divided into a specific number

Semiconductor module comprising four counter flip flops that counts from 0 to 15.

In the types of mounting of cylinders a differentiation is made between four basic forms (Figure B 4) : Flange mounting : The flange can be attached to the head (item a) or to the base (b). In a, posi

Pressure measured at the outlet on a device (DIN 24 312).

Main lines that are used to transport energy using hydraulic fluids.

Minimum signal variable that is required on the input to a device to change the output variable.

Control that predominantly uses analogue signals in the signal processing and that also uses with progressive function elements. An example is the analogue position control shown in (Figure A 17) with