Hakuteksti "*".

Current indicator

Specific time and force required on the actuated valve. The switch-on characteristic is different on DC and AC solenoids . On average the DC solenoid switches a factor of 3 times slower than an AC sol

Mathematical investigations intended to demonstrate whether the damping is sufficient for a stable state in the present system. There are also theories in the form of stability criteria .

States the reduction of the tension on an elastomer (seal) at a constant deformation and constant temperature and is therefore an important measure of the residual elasticity of a seal under pressure.

Jamming or blocking of the piston caused by a build-up of particles.

Surface foam

The flow rate Q of a hydraulic motor s calculated from the volume per revolution Vg, the rotary speed of the motor n and the volumetric efficiency factor ηv of the motor. Calculate the pump-flow of a

Flow rate coming from the pump, which a hydraulic motor takes on, depending on its displacement volume (geometric displacement). It is calculated as the product of the displacement and the rotation sp

Sealing systems in which the two surfaces involved in the sealing process do not touch. Due to the remaining gap, non-contact seals can never seal completely. The most important representatives of non

In general : Range within which the are spread if the same input signal is repeated ( Figure W 11 ). Measurement technology : Quantitative expression of a random error, which arises if different teste