Hakuteksti "*".

Device for separating small particles of dirt from the hydraulic fluid based on other particle characteristics apart from the particle size.

Encoder whereby a bar pattern ( incremental position measurement ) is applied to a disc. As this rotates, the angle of rotation is determined via the number of increments counted during the period of

Depending on the relative speed of the contact area and the lubrication condition, the friction displays non-linear behaviour, which can be attributed to characteristic mechanisms of action. A distinc

Comparative signal; a target course is simulated and an attempt is made to come as close to the reference signal as possible through a corresponding setpoint control.

Adjustability of a hydrostatic transmission based on a combination of a pump and motor with adjustable geometric displacement. This ensures the highest rotation speed range is achieved with a good lev

Transfer elements

Arrangement whereby a greater number of pipes for hydraulics, pneumatics and/or electrics can be connected or disconnected in one go ( Figure M 31 ). It must be set up in a way that allows a high numb

There are special boundary conditions for mobile machines (excavators, cranes, loaders, etc.). These conditions are due in part to the mobility, and in part to the tasks and environmental conditions.

Relationship between the weight of a system/input or output element and the power it transmits or provides. Given the very high force density , hydrostatic systems are much better than electric ones i

Disc-shaped piston with a vulcanised double pot seal or the like and combining the functions of a piston, piston guide and seal (Figure K 24) .