Hakuteksti "*".

Electronic functional group to produce ramps. Its effect is based on the fact that an electrical condenser (C) is charged (and discharged) with a delay ( Figure R 10 ), resulting in a general voltage

Workflow control with step enabling conditions that are only dependent on signals from the controlled system (process) (DIN 19 237). The process-dependent workflow control – previously known as "seque

General : A part of a program which can be delimited in terms of its allotted task or structure. A control : Consequence associated with control instructions for a self-contained application-based fun

The part of a valve , which ensures the desired function through its movements.

whereby the control algorithm is associated with non-linear behaviour, i.e. the input and output for the controller are linked to each other by a non-linear characteristic curve or function.

General : Graphically represented mutual dependency between two operating variables, often with a constant third being used as the parameter. Example: In Figure D79, the flow rate Q is applied to a co

The required filter size is based on the permissible flow resistance of the oil filter at the nominal flow rate. The selection of the filter size is affected by: The selected filtration grade , The fl

Adding together of increments (e.g. based on distances of 0.01 mm) in a counter outside of the actual measuring device . Increments are delivered in the form of electrical pulses and are added togethe

Pressure valve , which maintains a pressure before its inlet that is normally adjustable using a spring (e.g. to maintain a dynamic pressure).

Pressure in an auxiliary circuit fed by the main circuit of a system, in which the pressure is lower than the primary pressure . This is generally achieved using a pressure-reducing valve .