Hakuteksti "*".

Diaphragm accumulators are a type of hydraulic accumulator. They are used primarily for hydraulic damping, as energy stores and for pressure and flow rate equalisation.

Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain valve or idle circulation valve.

The pressure-dependent shut-off valve type DSV is used as a safeguard pressure gauge, for example. The valve type DSV is available for pipe connection or manifold mounting.

Pressure switches open and close an electrical contact at a previously defined pressure. As soon as the pressure is reached, a further work step is started or stopped by an electrical signal.

The Power Distribution Unit PDU is used to connect up to 4 or up to 8 batteries in a parallel circuit and connect them to an electrical drive system. Up to 5 or up to 10 outputs are available for the

The throttle valve type Q and the restrictor check valve type QR, QV are, as slotted throttles, insensitive to micro contamination. The restrictor check valve type QR, QV combines the function of a

On/off directional spool valves are used to control the direction of movement of consumers such as hydraulic motors and hydraulic cylinders.

he directional spool valve type SWPM is a 4/2- or 4/3-way directional valve with standard connection pattern NG 6 (CETOP 3) and NG 10 (CETOP 5). It is directly actuated and a binary valve. The dire

The proportional directional spool valve type PSL is suitable for constant pump systems and type PSV is for variable pump systems. The flow rates and load pressures for the individual consumers can be