Hakuteksti "*".

Hydraulic pump with a to the pressure, the flow rate or the state variable of an actuator . Servo pump Also known as variable displacement pump. The reason for using a variable pump is to improve the

Controllers where the relationship between input variables (system variables) and output variables ( correcting variables ) is a linear one. Linear regulators also include both single loop controllers

Annular gear pump/motor

Signal area in which the signal input , signal linking and signal processing are with electrical components. These are predominantly switches, relays and contactors. Electric signal processing has bec

Measuring procedure in which within the measuring range every value of the measured variable as an input variable is continuously assigned a value in the output range. The continuous assignment betwee

Reflects the ability of a hydraulic fluid to reduce mechanical wear on moving parts of a hydraulic system which it comes into contact with. To improve the wear protection capacity, wear protection age

As far as the control of hydraulic systems is concerned, a distinction must be made — since the term " control " is rather a general one — between control in the signal range and control in the power

Is used to stabilise closed circuit position control systems and together with velocity feedback has an optimal action in these circuits. On poorly damped drives (such as hydraulic drives) acceleratio

filter element

Interaction of various seals at a sealing point (e.g. on a piston rod) to address the increased sensitivity to leakage with operating conditions that are becoming harder at the same time: a situation