Hakuteksti "*".

The amplifier module EV1M3 can be mounted on a 32 mm or 35 mm top-hat rail by using an additional card holder. A multi-turn potentiometer is used to configure the valve parameters such as the base a

The directional spool valve type TLC is a combined design consisting of a directional spool valve and a releasable check valve. It can be used to hold hydraulic actuators in position for long periods

The CWD directional spool valve is a 6/2 or 6/3 valve that connects an upstream directional valve with two downstream hydraulic consumers. If necessary, two or three sections can be combined to form a

The pressure reducing valve type DK features a tracked pressure switch, e.g. pressure and switch are set simultaneously with an adjustment device. All versions have zero leakage when in the closed

Reducing connectors can be used to combine devices. Additional accessory parts such as screen filters and filter elements safeguard the hydraulic devices against larger, stray impurities which may occ

The check valve type RK, RB, RC and RE can be screwed-in, type ER can be plugged-in. The spring-loaded ball check valve type RK, RB and ER is very robust and insensitive to soiling. Type ER can be

Peak USB-Driver to be used with all HAWE software products with CAN interface (VisualTool, PSXCAN Tool, etc.).

In the lifting module type HMT and HST directional seated valves are used that ensure the load is held securely. Two-way flow control valves are used to limit the maximum flow rate. Valve sections of

The hydraulic press drive type MACB consists of two cylinder blocks with integrated suction valves and one pump module (MPLM). The pump module includes pump, filter, coupling, and motor flange. Th