Hakuteksti "*".

The displacement units in a hydrostatic displacement machine (pistons or rigid vanes) are supported by a cam (eccentric) in an eccentric position on the shaft. The size of the stroke determines the le

The static behaviour of a continuously adjustable valve describes the connection between the input variable and the output variable of the valve for the stationary state after settling. This includes

Variable pump in position " Delivery flow zero". Often, the pressure hold position of the pump, i.e. the position in which the pump covers the leakage losses incurred, is – incorrectly – labelled the

Typical demand made of the drive during a working cycle . .

Directional valve with a second tank connection. This design was very popular for a long time, as on the one hand it was possible to place different loads on the two connections and on the other hand

Difference between the largest and smallest permissible deviations of the from the limit (DIN 19 226 Part 2).

Priority valve

Flow control valves

The accumulator precharge pressure (p0-> p0h) changes with the ratio of the increased or decreased temperature T0h to the original temperature T0. Calculate the accumulator pressure on temperature cha

Collective term for all processes used to convert an analogue signal into digital signals , which use pulses as information carriers. This is done by changing (modulating) one or more of the signal. A