Hakuteksti "*".

When it comes to trimming Z-drives, HAWE offers ready-for-connection systems comprising a pump and cylinders that can be directly connected with hoses. The trim cylinder is optionally supplied with an

Priority valves are a type of metering valve. They ensure that particularly critical consumers are always adequately supplied with hydraulic oil. The priority valve type PV divides the pump volumet

In the closed state the check valve type CRH and RHC has zero leakage. It can be screwed-in and can be integrated into control blocks. The necessary mounting holes are straightforward to make.

The intermediate plates type CBA 1 enable additional functions and contain elements such as pressure reducing valves, pressure-limiting valves, seated valves etc. An intermediate plate can be inserted

The shuttle valve type WV is integrated in a T-fitting for pipe connection. The type WVC is a screw-in valve. The shuttle valves can withstand pressures up to 700 bar and have low flow resistances. T

The line rupture protection valve type LB offers a high level of safety in the event of pressure peaks. It features reproducibly accurate and secure closing at the pre-set trigger flow rate. Higher fl

The directional seated valve type G is available as a 2/2, 3/2, 4/2, 3/3 and 4/3 directional seated valve with different actuation types and plug types. It is a ball seated valve. Actuation using a ha

In the case of the air-driven hydraulic pump type LP, the flow rate depends on the set air pressure and the currently effective hydraulic counter-pressure. It can drop away until the pump comes to a s

The load-holding valves type LHK and LHT are suitable for applications that are not particularly prone to oscillations. Shock valves and shuttle valves with or without restrictor check valves can be