Hakuteksti "*".

In connection with valves , this means that the devices are integrated into the pipelines.

If a chamber at pressure p is suddenly connected to a drain line (e.g. on switching over a directional valve ) then the compression energy stored in the fluid is suddenly released, as a result the com

As almost all measured variables in fluid technology change in an analogue manner, they must first be divided up into equal size sections (steps) for digital measured value acquisition. This action ca

Local flow resistance with step cross-section constriction in which the ratio between the length l and the diameter d is relatively small (Figure B 18) : The smallest flow cross-section is outside the

Test conditions

Are functional effects of any cause that result in behaviour of the control that is not suitable for the task. A differentiation is made between: Active errors : Errors that trigger control functions

Device used for flow rate measurement (flow measurement) according to the displacement principle, which works like a geared motor . The flow rate to be measured rotates the pair of gears. This movemen

Abbreviation for Application Specific Integrated Circuit. Integrated circuit that is manufactured specifically according to the requirements of the related user or for a specific task. Here it is poss

Change in the output signal over time for a rising function with a pre-defined rate of change on the input signal. To depict this situation the output signal xa can be plotted in relation to the rate

Maximum permissible distance between oil level and intake port on the pump. If it is exceeded, the pump will not be completely filled, i.e. air bubble cavitation will occur. The intake height is depen