Hakuteksti "*".

The intermediate plates can be used to expand the functionality of directional valves with a hole pattern NG 6 according to . The intermediate plates type NZP enable additional functions and contain,

The axial piston pump type K60N is designed for open circuits in mobile hydraulics and operates on the bent axis principle. The pump is fitted mainly to the power take-off on commercial vehicle transm

The directional spool valve type SWPA is a 4/2- or 4/3-way directional valve with standard connection pattern NG 4 (CETOP 2). It is directly actuated and a binary valve. The directional spool valve

Floor-lock systems consist of a mini hydraulic power pack, manifold and cylinders and are delivered fully assembled and tested. They are used to lock, dampen and stabilise mobile units. As a result, t

The compact hydraulic power pack type NPC consists of the tank, the integrated DC motor and the radial piston pump directly attached to the motor shaft. This design results in a very small installatio

A hand lever operates the eccentric shaft that controls the plunger for opening or closing the valve seats. The actuation is undertaken via the hand lever with automatic centring in the neutral positi

The hydraulic press drive SAKB consists of one central control block and two separate suction valves.

The hydraulic press drive consists of a central pump block including pump, filter with electrical contamination indicator, coupling, and bell housing.

The axial piston pump type C41V is designed for open circuits in mobile hydraulics and operates on the swash plate principle. The large selection of different pump controllers allows the axial piston