Hakuteksti "*".

The expression is used for hydraulic components where the electronic control is integrated within the housing for the device. It mainly applies to proportional valves and servo valves (Figure I 15) .

Preload on seals

Systems in which only binary signals are transferred. They can contain, along with discontinuous two-point elements, also continuous elements provided the binary character of the overall system is ret

In the case of continuously adjustable directional valves and flow control valves: Dependence of the flow rate on the input signal given an constant valve pressure difference (DIN 24 311) ( Figure V 3

Screen filter

Double-acting cylinder with one-sided piston rod in which the ratio of the piston area AK to the annular area on the piston rod side is essential for the function of the fluid-related circuit (CETOP R

Resistance, which a fluid subject to friction must overcome when flowing through and valves . It is noticeable in the form of a pressure drop ( pressure loss ). The flow resistance comprises frictiona

The displacement volume taken on by a hydraulic motor during a revolution ( set geometric displacement ). It may be constant or variable, depending on the motor construction type.

In order to keep the operating temperature of oil-hydraulic systems as constant as possible, it is necessary to use an oil cooler to dissipate any heat losses that cannot escape through thermal radiat

The part of a hydraulic cylinder upon which the pressure of the medium acts and thereby generates a compressive force. F K = p 1 · A K — p 2 · A R Since friction occurs during the piston movement (par