Hakuteksti "*".

Tube connection G 3/8 or manifold mounting, with adjustable lowering throttle.

The proportional pressure-limiting valve type PMV is a pilot-controlled valve in a spring-loaded ball version. The pressure can be set to up to 700 bar. The pressure-limiting valve type PMV is availab

The throttle and shut-off valve type AVT produces a throttle effect by means of an annular gap. The valve type AV is available as a screw-in valve or valve for pipe connection.

The directional seated valve type VP is a manifold mounting valve. It is a cone-seated valve. 2/2, 3/2 and 4/2 directional seated valves with different types of actuation are available. All connection

The differential cylinder type LVM, LAS is designed for a traversing speed up to 0.1 m/s, and thanks to its high-quality seal system can remain in position for extended periods. When operated correctl

Via a control line the higher pressure in the high-pressure circuit holds open the pressure-controlled 2 directional valve type CNE and with it the idle circulation. In the low-pressure circuit the va

The modular kit available for MPUs contains a variety of electric motors with different power outputs, which can be combined with different positive displacement pumps. The wide range on offer allows

The type NBVP is a manifold mounting valve with standard connection pattern nominal size NG 6. 2/2-, 3/2-, 3/3-, 4/2-, 4/3- and 4/4-way directional seated valves with different types of actuation are

The sequence valve type VR is available as a screw-in valve and in a housing version for in-line installation.

The KADM type pressure reducing valve acts as a copier valve (LS booster valve). In a hydraulic system with a variable pump and a closed centre load sensing valve (CC-LS valve), the copier valve boost