Hakuteksti "*".

Element for connecting pipes that permits rotation at the joint (Figure D 36) . Rotary pipe joints are required wherever hydraulic energy must be routed from a stationary part of a machine to a moving

Cylinder design that is equipped with several, mostly binary tiered pistons that can be operated in any combination. Therefore with n pistons 2n-1 positions are obtained with a positioning accuracy th

Monitoring process for buses with access without a defined sequence. Access collisions are detected. fieldbus

Two specific, mutually exclusive states, e.g. yes/no, correct/incorrect, on/off, O/ L or 0/1. The binary numerical system has the base 2. With n binary signals it is possible to define 2n states. Ther

Device for actuation in only one direction. In the other direct there is no actuation (CETOP RP 100).

Statement list

Output module for a signal transfer element, e.g. main hydraulic stage in a proportional valve.

Time that is measured between the hydraulic fluid entering the cylinder and the start of the piston movement.

The understanding of some processes in fluid technology is improved if use is made of the analogies that exist between electrical and hydraulic laws. Given specific boundary conditions, it is possible

Process of searching for a mathematical model for an actual system which provides a satisfactory description of its stationary and dynamic characteristics. This makes it necessary to define the struct