Hakuteksti "*".

Process in information is converted into a code to make it machine-readable so it can be processed.

With analogue measuring procedures the response value is the smallest value for a change in the input variable that, starting from the zero point, causes a clearly identifiable change in the output va

Time that would be necessary to reach an agreed value for the task or controlled variable if its max. rate of change from the initial value of the output variable to the agreed value were to remain ef

Inverse of impedance .

Transfer elements that measure and process the values for continuous variables at discrete times (E DIN 19 226, Part 2).

Response pressure (DIN 24 312)

Parameter to determine the minimum oil volume of a container, which relates to the flow rate Q of the pump per minute: The size of U depends on the operating mode and fluctuates between 6 in the case

Arrangement of several directional valves including pressure and control valves in a single block (monoblock valve) or individual valves screwed together (sandwich valve). Valve blocks are used as a m

The most common methods use measuring shafts and . They can measure precisely, however, the measured variable must be tapped via sliding contacts or wirelessly. Conversely, with hydraulic torque measu

Cylinder in which a pressure difference can act in both directions (forward and return stroke) ( ISO 1219-1 ). Double-acting cylinders have two surfaces that act in opposite directions. The surfaces a