Hakuteksti "*".

The linearity error corresponds to the maximum difference in gradient or the maximum deviation between the target characteristic curve (straight lines) and the actual characteristic curve for the meas

Closed loop structure in a binary system that contains at least one binary memory element.

Information defining the lowest required pressure and the highest permissible pressure for the safe operation of a device (system).

Sealing systems in which the sealing gap between two sealing surfaces is sealed to a greater or lesser extent by a sealing element that touches both surfaces. The related deformation is applied by scr

Unit for pressure: 1 bar = 105 N/m2 The unit "bar" is frequently used in modern fluid technology, as that way the traditional numerical values can still be used for pressures. In SI units the unit "pa

Plate on which the valve is fastened. It contains the bores necessary for the function of the valve and is connected to the pipes. There are different types: Single port mounting subplates: These are

Recording or acquisition of measured variables using analogue measuring instruments. The measured value is represented continuously and with the correct magnitude.

Time in which a new (measured) value is output in digital measuring systems. The parameter is stated in ms.

Device that indicates the absolute pressure at a measuring point in a hydraulic fluid, referred to a perfect vacuum.

Calculation of the setpoint using a computer program, into which only sampling points of the setpoint are entered. The computer then calculates the change of the setpoint over time incrementally, e.g.