Hakuteksti "*".

In general : Change of the input signal that is necessary to generate a measurable change in the output variable, if the input signal is changed from a static point in the same direction in which the

Cylinders, which do not meet the standards or not all of the standards ( standard cylinders ) but are offered by their manufacturers as standard. The deviations apply mainly to pressures and the pisto

General : A complete instruction for solving a task, together will all the necessary agreements. For controls : All the various instructions and agreements for signal processing which will influence a

Hydraulic motor designed to run smoothly at very low rotation speeds without any need for transmission. The term slow speed high torque motor is not strictly defined, but it is restricted to a rotatio

Double-acting cylinder with two piston rods. The velocity is the same in both directions if both piston rods are the same thickness and the same flow rate acts on both piston areas. ( Hydraulic cylind

Hydro-mechanical converter (amplifier) system for servo valves , which is based on the conversion of kinetic energy to static energy. A jet pipe, which can be actuated by an electro-mechanical convert

Operating pressure

A distinction is made between analogue and digital processes ( Figure W 6 ). In analogue position measurement processes, the resistance position measurement (with potentiometer) is commonly used for l

Biologically degradable, i.e. environmentally-friendly hydraulic fluid. based on natural base oils. Besides the desired environmentally-friendly properties, rapeseed oil displays properties such as po

Volume (bulk) filters