Hakuteksti "*".

Synonym: zero cut overlap

The nominal mode of operation describes the basic loading of an electrical machine. It is defined in international standard IEC 60034-1. It helps provide an initial assessment of whether a component (

16-bit industrial fieldbus from Intel.

Line connecting the signal averages in the (static) characteristic curve for a device where hysteresis is averaged out, i.e. with hysteresis at zero ( Figure M 27 ) (DIN 24 311).

Pipe inductance is a measure of the pressure difference required, assuming the flow is free of friction, to change the flow rate inside a pipe. It is based on the mass inertia associated with the flui

Pipe fittings

Term for a specific type of control whereby functions are performed one after the other. The technique in question, which involves optimising how a device is used, has now been overtaken by synchronou

As far as hydrostatic transmissions with an internal power split are concerned, the input torque from the drive motor is fed through the transmission using mechanical means only, while hydraulic torqu

Devices, which contains an electrical switch, the contact of which is actuated at a given flow of the hydraulic fluid.

The signal, which brings about a state change as the result of a signal formation or signal processing.