Hakuteksti "*".

The type OSCA-D load-holding valve is especially suitable for applications that are either particularly susceptible to vibration or that work with very high load pressures. The valve is designed as a

The differential cylinder type LVM, LAS is designed for a traversing speed up to 0.1 m/s, and thanks to its high-quality seal system can remain in position for extended periods. When operated correctl

The pitch system is used to adjust the pitch angle of the rotor blades in wind turbines in order to set the optimum blade position to match the wind direction. This optimizes the energy yield and at t

HAWE Hydraulik’s drives for exoskeletons are fully assembled hydraulic systems consisting of a hydraulic power pack, valve block, cylinder, hose line and sensor system. They were developed by HAWE Mic

The restrictor check valve type BC combines the function of a flow valve with a check valve. The valve is available as a perforated restrictor or as a slotted restrictor. It limits the flow during the

The hydraulic press drive consists of two cylinder blocks (SAMB) including suction valves and one pump module (SPLM), consisting of pump, filter, coupling, and motor flange, which enable operation of

The proportional amplifier type EMMA has been developed for direct mounting onto a solenoid valve as a line connector. It is suitable for controlling proportional single-action and twin solenoids. Th

The connection block type B is suitable for single-circuit pumps. A pressure switch can be mounted directly on the connection block. The type B variant can also be used in combination with differentia

HAWE Hydraulik’s heavy-duty window lifters have been designed specifically for use in armoured vehicles. In an emergency, they open and close bulletproof glass weighing up to 45 kg in just 6 seconds.

The directional valve bank type BNG connects individual valve sections using sub-plates, thus enabling compact hydraulic manifolds to be assembled flexibly. Intermediate plates enable additional func