Ricerca di "*".

In hydraulics , and depending on the area of application, pressure levels below 100 bar are classed as low pressure.

Pressure surge

Control deviation

In the case of continuously adjustable valves: Dependence of the flow rate on the load pressure with the input signal as a parameter (DIN 24 311). The graphical representation is the flow rate/pressur

In pneumatics, this covers the range from around 2 bar to 10 bar. The comparable pressure range in hydraulics is referred to as the medium pressure range , although this is associated with higher pres

A control for signal processing that operates predominantly with binary signals in which the binary signals are not an element of the numerical information displayed. The binary control predominantly

Term used in digital signal transmission, signal processing ; measure of the resilience of a code against transmission errors (literature: R. W. Hamming, Error Detecting and Error Correcting Codes, Be

As on hydraulic motors the torque is proportional to the pressure the torque limitation on a hydraulic motor (hydrostatic transmission) is undertaken via the pressure-limiting valve in the system.

Transport motion with high speed to cover the free travel from the end position to the start of operation.

On compressors: Ratio of the absolute final pressure to the absolute inlet pressure on a compressor. The pressure ratio on a multi-stage compressor is given by the ratio of the absolute inlet pressure