Ricerca di "line".

Pressure created by flow resistances which must be overcome when feeding back the pressure fluid (to the tank).

Line connected to the intake port of a hydraulic pump or compressor and permits the transport of hydraulic fluid.

measurements will subsequently need to be taken for inspection purposes. The mini measuring device (for on-line operation) consists of a measuring coupling attached to a device or fitting and which enables it to

Here, linearity refers to the relationship between the input measured variable (e.g. distance, pressure) and the electrical , which should remain as constant as possible. Where this is not the case, i

Bus

Ring-shaped (loop) hydraulic fluid line to supply multiple consumers. Compared with a stub line, the loop line enables: a balanced supply of pressure, i.e. there are smaller pressure fluctuations and smaller [...] sections with the same flow rate or pressure drop. Compressed air networks are often designed as a loop line. In hydraulic systems, loop lines are used, for example on ships and in large-scale water hydraulic

Hose cut to length, with the necessary connection fittings on both sides.

Line to feed the hydraulic fluid back to the container after the energy has been transferred. As with the Return line filter it must be designed according to the largest flow rate and not according to

Line which returns leaked fluid to the container. Its dimensions should ensure this is possible at all times with hardly any pressure — even at low temperatures.

high-pressure, in order to save energy. In hydraulic systems, the low-pressure line provides 20 to 30 bar, while the high-pressure line offers 200 to around 350 bar.