Ricerca di "*".

Parameter for the power losses occurring in hydraulic systems, which can be noticed in the form of and leakage losses . There are also mechanical losses as a result of friction (Figure H 20) . A disti

Reversing motor

Losses arising in hydraulic pumps and motors when the housing is full of oil and the components are moving around inside. These are dependent on the rotation speed and — particularly during idling — m

Changing the stationary characteristic curve for a device by modifying the input signal in order to compensate for non-linearities , reduce hysteresis and the like. This kind of correction can involve

Electronic circuit that separates the useful portion of a signal (e.g. measured signal) from the superimposed interference. They are either part of other measuring instruments (e.g. measuring amplifie

On systems that correspond to a 1st degree differential equation, the corner frequency is the intersection of the horizontal asymptote with the asymptote on the falling branch in a Bode diagram (see a

Electrical arrangement to split an input signal into two .

In terms of fluid technology there is no closed regulatory system in terms of safety technological requirements. Rather, these are distributed over a series of rules, regulations and standards of the

That part of a lip seal that generates the preload during installation (Figure D 13) . On compact seals the sealing lip is often shortened to form a sealing edge.

Hydraulic resistance control for an actuator with two type A hydraulic half bridges. For example, the control of a hydraulic cylinder with a dual effect with a continuously adjustable directional valv