Ricerca di "*".

Complete working system for positioning tasks, consisting of a hydraulic cylinder with integrated control (high response proportional) valves and an integrated position measurement system (Figure H 13

Flow rate measurement procedure

Valve assembly system in hydraulics whereby a mounting area for valves — to which the pipe is screwed from behind — is attached to the drive unit, while the valves are mounted from the front so they a

Valve with three switching positions (e.g. forward-stop-backward). The number of positions is stated after the number of ports, e.g. 4/3 directional valve: 4 ports, 3 switching positions.

Flow rate characteristic

In hydraulics a differentiation is generally made between four pressure ranges within which the allocation of pressures is however a little scattered: Low pressure (LP): Pressures up to approx. 100 ba

Part of a system, which is designed with the intention of breaking in the case of overloading in order to protect the rest of the machine. At the same time, it is to be arranged such that it is easy t

Possible noise elements on a signal are removed or suppressed by a downstream filter . The term smoothing is used if, e.g., by means of the usage of an RC low pass filter the linearity of a signal is

A hydraulic system in principle comprises the generative section in which the hydraulic energy is in general produced by hydraulic pumps, the conducting section, comprising and fluid power control dev