Flushing power pack
Hydraulic power pack, consisting of a hydraulic pump and a large Filter with a fineness of 10 or 25 μm, which is used in the main flow to remove the built-up dirt in a hydraulic system before it is actually
Acoustic decoupling measures
to prevent sound from being passed on from the (active) sounds generators (in hydraulic systems : pump, motor, valves ) to downstream components that are capable of oscillating (passive sound generators
Staged switch motor
staged switching motors is used primarily in the case of multi-stroke hydrostatic motors, but a vane pump construction has also become more common ( Figure S 110 ).
Return line filter
designed for pressures of around 20 to 30 bar. Return line filters – regardless of the size of the pump flow rate – must be selected according to the largest flow rate present. This occurs when refluxing
Hydraulic power pack
consisting of a drive motor, hydraulic pump and hydraulic fluid tank. The drive motor is connected to the hydraulic pump via a shaft and drives this. The motor and pump can be installed on the tank, as well [...] must be taken into consideration here. The critical flow speed occurs at the smallest diameter. The pump is driven by the electric drive and converts the electrical energy into hydraulic energy. This is
Impressed flow
The flow rate in a hydraulic system with a variable pump and appropriate adjustment corresponds to the requirements in accordance with which the adjustment functions. The term impressed, i.e. pre-defined
Power losses
what is lost can be attributed to: volumetric losses : these are caused by incomplete filling of the pump, internal and external leakage losses and compression losses , losses resulting from the flow of the
Internal fluid admission
incoming and outgoing flow rate occurs via a central (inner) pintle valve (Figure I 12) ( radial piston pump ). Generally, some kind of external support is involved.
Secondary adjustment of hydrostatic transmissions
secondary adjustment works with an impressed flow ( constant current network ) and has a constant pump and a variable motor, which performs the torque setting itself. This results — at constant pressure
Piston for rapid traverse
To obtain a higher rapid forward movement speed v E with the pump designed for the operating speed, a piston with the area is arrange in the main piston and switched such that pressure is only applied